In Ihrem Warenkorb: 0 Artikel, 0,00 EUR
DPA 4006 TL Stereo Kit (matched pair)
The DPA 3506 is a complete 4006-TL Stereo Kit with two carefully factory-matched phantom powered (P48) condenser microphones. The 3506 also includes a Stereo Boom and the complete range of DPA Acoustic Modification Accessories, all in a sturdy carrying case with a foam insert. The specially selected microphones DPA 4006-TL are matched within ±0,5 dB on both frequency range, sensitivity and self noise. The maximum phase response difference from 50 Hz to 20 kHz is 5°. The high sensitivity, the low noise-floor and the extremely linear frequency response from 20 Hz to 20 kHz (±2 dB) of the microphone pair makes the 3506 the perfect choice for all professional A-B Stereo recordings.
Principle of operation:
Pressure
Cartridge type:
pre-polarised condenser
Power supply:
48 V Phantom power
Frequency range, ± 2 dB:
20 Hz - 20 kHz up to 124 dB peak
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Typ. 15 dB(A) re. 20 µPa (max. 20 dB(A))
Equiv. noise level ITU-R BS.468-4:
Typ. 27 dB (max. 29 dB)
Capsule diameter:
16 mm (0.63 in)
Total harmonic distortion (THD):
<0.5% up to 129 dB SPL peak
Preamplifier frequency range:
20 Hz to 40 kHz ±1 dB
Output impedance:
<75 Ohm
Cable drive capability:
Up to 300 m (984 ft)
Microphone length:
165 mm (6.5 in)
Max. SPL, peak before clipping:
143 dB SPL peak (f> 200 Hz)
Weight:
150 g (5.29 oz)
Dynamic Range:
Typ. 120 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
79 dB
Connector:
3-pin XLR-M (Standard P48)
Matching tolerance (frequency response, sensitivity and self-noise):
±0.5 dB (20 Hz - 20 kHz)
Current consumption:
2.60 mA
Phase deviation:
<5°
|
|
