In Ihrem Warenkorb: 0 Artikel, 0,00 EUR
DPA 4011 TL Stereo Kit (matched pair)
The 3511 is a complete stereo kit for a broad range of recording applications using two 4011-TL Cardioid Microphones, carefully matched within ±1 dB on frequency response, sensitivity and self-noise. These cardioids are exceptionally linear in their frequency response - also off axis, giving you the natural experience. Several standard set-ups such as ORTF and XY are possible. The 4011-TL mics handle very high SPL and will therefore allow close placement as well as more distant. Often used for piano recordings of jazz or pop with a placement closer to the hammers or as overheads for drums.
The kit includes 2 windscreens, 2 very effective shock mounts, a precision-crafted stereo boom for secure mounting of microphone pairs for A-B stereo recordings and a spacer to allow XY or ORTF stereo set-ups on the boom.
Principle of operation:
Pressure gradient
Cartridge type:
19 mm (0.75 in) pre-polarized condenser
Power supply:
48 V Phantom power
Frequency range, ± 2 dB:
40 Hz - 20 kHz
Directional characteristics:
Cardioid
Equivalent noise level A-weighted:
Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
Sensitivity, nominal, ±2 dB:
10 mV/Pa; -40 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4:
Typ. 25 dB
Total harmonic distortion (THD):
<0.5 % up to 110 dB SPL peak
<1 % up to 116 dB SPL peak
Output impedance:
<200 Ohm
Cable drive capability:
Up to 100 m (328 ft)
Microphone length:
175 mm (6.89 in)
Max. SPL, peak before clipping:
158 dB
Weight:
165 g (5.82 oz)
Dynamic Range:
Typ. 97 dB
Switchable attenuator:
0 dB, -20 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
75 dB(A)
Connector:
3-pin XLR-M (Standard P48)
Matching tolerance (frequency response, sensitivity and self-noise):
±1 dB (40 Hz - 20 kHz)
Current consumption:
2.60 mA
Phase deviation:
<10°
|
|
