In Ihrem Warenkorb: 0 Artikel, 0,00 EUR
Royer Labs R-122 V
click to enlarge
Das R-122 V ist ein Röhren-Bändchenmikrofon, für Studio- und Rundfunkanwendung. Das R-122 V kann einen sehr hohen Schalldruck vertragen und ist damit optimal für Solisten, Bläser, Overhead und Gitarrenabnahme geeignet. Das Mikrofon wird mit Speisegerät geliefert
Features:
- Vacuum tube electronics provide high output capability, optimal impedance to the ribbon element and low output impedance
- Extremely low self-noise
- Operates from a dedicated power supply
- High SPL capabilities for electric guitar and percussion instruments
- Absence of high-frequency peaks, "ringing" and phase shifts
- Ribbon element unaffected by impedance/load, heat or humidity
- Very low magnetic leakage
- Equal sensitivity from front or back of element
- Consistent frequency response regardless of distance
- Rear side of mic records slightly brighter when three feet or closer to sound source
Recommended Applications:
- Close and distant miking
- Strings - solo & sections
- Acoustic piano, harp, etc.
- Electric and acoustic guitar
- Vocals, commercial broadcast, voice over
- Brass, horn sections
- Drum overheads, room miking
- Percussion instruments
- Live events-recording and sound reinforcement
Technical Specifications:
- Acoustic Operating Principle: Electrodynamic pressure gradient with vacuum tube electronics.
- Vacuum Tube: JAN mil-spec 5840W pentode wired in triode configuration
- Polar Pattern: Figure-8
- Generating Element: 2.5-micron aluminum ribbon
- Magnets: Rare Earth Neodymium
- Frequency Response: 30 -15,000 Hz +/- 3dB
- Sensitivity: -36 dB (re. 1v/pa +/- 1 dB)
- Self-Noise: < 18 dB
- Output Impedance: 200 Ohms, balanced
- Rated Load Impedance: 1 K-Ohm
- Maximum SPL: >135dB SPL @ 20 Hz
- Power Requirements: Plate supply: 135 VDC @2ma, Filament supply: 6 VDC@ 150ma from dedicated power supply.
- Dimensions: 206mm L, 25mm W (8 1/8 " L, 1" W).
- Weight: 300g (10.9 oz )
- Finish: Dull Satin Nickel/Matte Black Chrome optional
Optionales Zubehör:
- Ultra Shockmount RSM - 1 228,00 Euro
- Popschutz PS 101 57,00 Euro
|
|
